How To Clean A Window Air Conditioner Mold: Easy Steps
We must take care of our appliances to make it last longer and save us from spending more for replacements. By cleaning our air conditioners, we add more years to its life and make it work like it is good as new. It only takes little time and effort. This guide will teach you simple steps on how to clean a window air conditioner mold.
Cleaning Agents Used for Window Air Conditioners
We can make our solution out of anything available at home. We can use detergent mixed with water and put it on a spray bottle. Others also use cleaning liquid specified for air conditioners. You can improvise on the cleaning agents you wish to use so long they aren't acidic solutions which can ruin your AC. The cleaning solution you will use will make this how to clean a window air conditioner mold task easier.
AC Parts You Should Clean the Most
A window air conditioner unit needs to be cleaned regularly to keep its efficiency in cooling the room. The whole air conditioner unit needs a deep cleaning, especially the front grille, the filter, the blower, and the fan, where the dust and dirt are trapped that may cause the unit to slow down the cooling. These would also cause the build-up of stains that destroys the appliance, and molds – of course.
Steps in Cleaning the Window Air Conditioner
Here are our steps on how to clean a window air conditioner mold:
- Remove the unit from the window and bring it outside where you can comfortably do the cleaning. You can use a table to do it. Ensure you have a faucet near you, or it would be better if you have a hose with a nozzle. The pressure of the water controlled by a nozzle helps you get rid of the dirt.
- The next thing to do is to remove some parts of the unit for separate cleaning. First, take the front grille from it. And then the filter from the front grille. Next is the cover of the unit. You would need a screwdriver to get all the screws that hold the surface from the main part. Be careful about doing this as not to break any parts.
- Spray on the parts you removed from the unit, with the solution of your preferred cleaning agents. Let the liquid soaked on the surface.
- Spray also the evaporator coil of the unit. Do not worry about the electrical parts get wet because a Styrofoam covers it. Do the spraying to the blower, then on the fan and its surfaces, and the unit’s base. Let the solution stay for ten minutes or less.
- While waiting for the cleaning material to act upon the air conditioner's base parts, wash the front grille, the filter, and then cover with the hose's water with a nozzle. If it is not available, you can pour water onto it. Use an old brush and scrub the removed parts gently. You can repeat the step if you want to.
- Wash the coil, the blower, and the air conditioner's fan thoroughly, including the appliance's lower part.
- Brush the blower's surface as there is much dirt on this part, then on the fan and the sides on it. Include also the base of the unit as there are lots of stains in it.
- Repeat brushing in the main parts of the air conditioner for deep cleaning.
- Lift one side of the unit to drain the water. Ensure that there is nothing left that would cause clog in the water drainage from the air conditioner unit.
- Let the parts dry for more than two hours and put it back to the base part.
- It would be best to dry the unit for 24 hours before using it again.
Now you know how to clean a window air conditioner mold. As to the cleaning material used, it is at your discretion what you’re going to use. If you have an extra dollar to spend for an air conditioner cleaner, it would be better not to use corrosive cleaning agents such as hydrochloric acid.
How Often Should the Cleaning Be Done?
To maintain the window air conditioner unit’s efficiency, we must have a periodical cleaning onto it. The most reasonable period that it must be done should be at least once every year. Even if the appliance is still good, we can secure that the unit runs well by regularly cleaning, especially when we need it most.
Learning how to clean a window air conditioner mold is economical. Instead of delegating the work at a repair shop and paying money for the services rendered, or worse, buying a new unit, doing it by yourself can help you keep your penny in your pocket. In these days, practical knowledge can save out hard-earned income. Know more about cleaning appliances.