Mount-It! MI-407 LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm for 19-37" Flat Screen Displays with VESA 75 to 200, 55 lb Capacity WITH 17.5" EXTENSION

Product prices and availability are accurate as of 2018-10-18 03:17:21 EDT and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon

Manufacturer Description

Mount-It! full motion articulating TV wall mount offers extreme versatility with a maximum extension of 18" from the wall. This mount is ideal for installations where the TV needs to be swiveled significantly for various seating arrangements. Perfect for smaller flat screen TVs or for desktop computer flat screen monitors. This mount swivels and tilts, and fits flat against the wall or extends to 18 inches.

 Will the mount fit my TV?

1. Check the weight of your display, it should be less than 55 lbs. 2. Locate the four mounting holes on the back of the screen. If the bolt holes are  200x200mm/200x100/100x100/75x75 (8"x8"/8"x4"/4"x4"/3”x3”) apart from each other vertically and horizontally this bracket will fit. 3. Please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.

ValueMax brings you this Mount-It! wall mount at a great value. MI-407 provides you all you need, without the hefty price. Compare the price to any other similar articulating TV wall mount on Amazon.

Its articulating arm design is incredibly sturdy, and supports a wide range of LCD, LED flat screen TVs. Mount swivels from left to right for viewing from multiple angles. Continuous tilt motion is possible without the use of tools. Powder coated steel construction provides a sleek, high-tech look. Ideal for corner installations.

Features and Specs:

- TV Size Range: 19" - 37" (depending on VESA bolting pattern and the TV weight).

- Weight Limit: 55 lbs

- Collapses to 3.1" low profile, Extends 18" from the wall.

- Tilt, Swivel and Extend/Collapse function.

- Includes all necessary mounting hardware.

- Wall plate dimensions: 2.25” W, 7.5” H.

- Tilt: up to 12 degrees down. Swivel: 180 degrees to left or to right.

Product Features

Universal TV wall mounting bracket design fits most of 19-37" (some up to 47 inch) LCD/LED/Plasma TVs on the market up to VESA 200x200 and 55 lbs (Fits VESA 200X200, 200X100, 100x100, 75x75 mm). Please check VESA (mounting hole pattern behind TV), stud spacing, possible blocked cable/input and TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV and the installation application. This wall mounting kit is compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse 19, 23, 24, 27, 30, 32, 36, 37 and some 40, 42, 47 inch TVs. Please ensure your TV has VESA 200 pattern or smaller. Tilt, Swivel, Articulate, Extend, Collapse with this universal TV wall mounting bracket. Full motion capability makes is ideal for corner installation, over a fireplace, inside a TV center. TV stays as close as 3.1" from the wall or can extend up to 18 inches. Swivel left or right 180 degrees. Effortless 180° swiveling capability gives you the best view from any seat in the house. Continuous Tilt Feature (up to 12 degrees down) for Better Viewing Angle and Reduced Glare. Low-profile design ensures TV is close to the wall for a sleek finish. VESA plate can be taken off from the wall mounted arms for easy installation by one person. Weight rated to 55 lbs. This single stud wall mount is sturdy enough for most of the LCD and LED TVs on the market. Install your precious TV with confidence. Constructed from Reinforced Aluminum. Quick and easy to install - bracket comes complete with full instructions and INSTALLATION HARDWARE, bubble level and 6 ft HDMI cable.

Write a Review