1. Ensure that the antenna is well connected before energized, or the product may be damaged.
2. If you find out the signal is weak or the picture is moving around in the screen and so on, you can try to switch to another channel, or adjust the angel between the antenna and RCA cable.
3. Make sure the unit isn't interfered by router signal.
4. Please ensure the antenna between the transmitter and the receiver is at an angle of 45 °
5. Pay attention to product heat dissipation issue when you use this unit.
6. Transmitters and receivers should placed in a higher position, 2 meters or above;
7. Ensure there is no too much obstacles between transmitter and receiver, you can avoid obstacles by extending the antenna or RCA cable.
8. If you have any issues in using the product, please don't hestiate to contact us via E-mail.
* Transmitter power: 3000mW.
* Good microwave anti-interference performance.
* Easy operation & installation.
* Audio modulation: FM.
* Signals transmitted: Video and Audio.
* Hi-efficiency and special antenna.
* Power on LED indicator.
* Body: All metal with metallic paint, rust resistant.
* Power source: DC9V/12V 1A.
Specification of Transmitter:
* Channel: 2.4GHz, Channel switchable 2.410G/2.428G/2.446G/2.462G
* Power Consume: 3W
* Video System: PAL/NTSC
* Voltage:DC 12V 1A
* Support:2 chanel Audio 1channel Vedio
Specification of Receiver:
* Channel: 2.4G PPL , Channel switchable
* Frequency: 2.4GHz
* Voltage: 12V 1A
1 x 2.4G 3W Transmitter
1 x 2.4G 3W Receiver
2 x Antenna
2 x AC Adaptor
1 x RCA Cable
1 x User manual